# Copyright 2026 Daniil Shmelev
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# =========================================================================
from typing import Union
from ctypes import c_uint64, POINTER, cast
import numpy as np
import torch
from .param_checks import check_word_or_word_list, check_type, check_non_neg
from .error_codes import err_msg
from .dtypes import CPSIG_SIG_COEF, CPSIG_BATCH_SIG_COEF, CUSIG_SIG_COEF_CUDA, CUSIG_BATCH_SIG_COEF_CUDA
from .words import word_to_idx
from .data_handlers import SigInputHandler, PathInputHandler, SigOutputHandler
def sig_coef_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes):
err_code = CPSIG_SIG_COEF[data.dtype](
data.data_ptr,
result.data_ptr,
multi_indices_ptr,
num_multi_indices,
degrees_ptr,
data.data_dimension,
data.data_length,
data.time_aug,
data.lead_lag,
data.end_time,
prefixes
)
if err_code:
raise Exception("Error in pysiglib.sig_coef: " + err_msg(err_code))
return result.data
def batch_sig_coef_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes, n_jobs = 1):
err_code = CPSIG_BATCH_SIG_COEF[data.dtype](
data.data_ptr,
result.data_ptr,
multi_indices_ptr,
num_multi_indices,
degrees_ptr,
data.batch_size,
data.data_dimension,
data.data_length,
data.time_aug,
data.lead_lag,
data.end_time,
prefixes,
n_jobs
)
if err_code:
raise Exception("Error in pysiglib.sig_coef: " + err_msg(err_code))
return result.data
def sig_coef_cuda_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes):
err_code = CUSIG_SIG_COEF_CUDA[data.dtype](
data.data_ptr,
result.data_ptr,
multi_indices_ptr,
num_multi_indices,
degrees_ptr,
data.data_dimension,
data.data_length,
prefixes
)
if err_code:
raise Exception("Error in pysiglib.sig_coef (CUDA): " + err_msg(err_code))
return result.data
def batch_sig_coef_cuda_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes):
err_code = CUSIG_BATCH_SIG_COEF_CUDA[data.dtype](
data.data_ptr,
result.data_ptr,
multi_indices_ptr,
num_multi_indices,
degrees_ptr,
data.batch_size,
data.data_dimension,
data.data_length,
prefixes
)
if err_code:
raise Exception("Error in pysiglib.sig_coef (CUDA): " + err_msg(err_code))
return result.data
[docs]
def sig_coef(
path : Union[np.ndarray, torch.tensor],
words : Union[tuple[int, ...], list[tuple[int, ...]]],
time_aug : bool = False,
lead_lag : bool = False,
end_time : float = 1.,
prefixes : bool = False,
n_jobs : int = 1
) -> Union[np.ndarray, torch.tensor]:
"""
Computes specific signature coefficients for a single path or a batch of paths. For
a single path :math:`x`, the signature coefficient at a multi-index
:math:`I = (i_1, i_2, \\ldots, i_k)` is given by
.. math::
S(x)^I_{[s,t]} := \\int_{s < t_1 < \\cdots < t_k < t} dx^{i_1}_{t_1} \\otimes dx^{i_2}_{t_2} \\otimes \\cdots \\otimes dx^{i_k}_{t_k}.
:param path: The underlying path or batch of paths, given as a `numpy.ndarray` or `torch.tensor`.
For a single path, this must be of shape ``(length, dimension)``. For a batch of paths, this must
be of shape ``(batch_size, length, dimension)``.
:type path: numpy.ndarray | torch.tensor
:param words: Multi-indices :math:`I` at which to evaluate signature coefficients, given as a list
of lists of integers in :math:`[0, d-1]`, where :math:`d` is the dimension of the path(s). For example,
for a 2-dimensional path, one could pass ``[(0,), (1,0), (0,1,1)]`` to compute the coefficients at
the three multi-indices :math:`I = (0), (1,0), (0,1,1)`.
:type words: tuple[int, ...] | list[tuple[int, ...]]
:param time_aug: If set to True, will compute signature coefficients of the time-augmented path, :math:`\\hat{x}_t := (t, x_t)`,
defined as the original path with an extra channel set to time, :math:`t`. This channel spans :math:`[0, t_L]`,
where :math:`t_L` is given by the parameter ``end_time``.
:type time_aug: bool
:param lead_lag: If set to True, will compute signature coefficients of the path after applying the lead-lag transformation.
:type lead_lag: bool
:param end_time: End time for time-augmentation, :math:`t_L`.
:type end_time: float
:param prefixes: If ``True``, will additionally return all prefixes of signature coefficients.
These prefixes are extracted for free as a by-product of the computation.
For example, passing ``word=[(1,2), (3,2,1)]`` with ``prefixes=True`` returns an
output equivalent to passing ``word=[(1,), (1,2), (3,), (3,2), (3,2,1)]`` with ``prefixes=False``.
:type prefixes: bool
:param n_jobs: Number of threads to run in parallel. If n_jobs = 1, the computation is run serially.
If set to -1, all available threads are used. For n_jobs below -1, (max_threads + 1 + n_jobs)
threads are used. For example if n_jobs = -2, all threads but one are used.
:type n_jobs: int
:return: Signature coefficients of shape ``num_words`` or batch of signature
coefficients of shape ``(batch_size, num_words)``.
:rtype: numpy.ndarray | torch.tensor
.. note::
If the number of requested coefficients is large relative to the size of the full truncated signature,
it is usually faster to call ``pysiglib.signature`` and extract the required coefficients using
``pysiglib.extract_sig_coefs``. This function is only faster when a very sparse collection
of coefficients is required.
Example:
---------
.. code-block:: python
import torch
import pysiglib
path = torch.rand((10, 100, 5))
words = [(0,), (1,0), (1,2,3)]
coefs = pysiglib.sig_coef(path, words)
.. code-block:: python
# Using prefixes to return all prefix coefficients
import torch
import pysiglib
path = torch.rand((10, 100, 5))
words = [(4, 3), (1, 2, 3)]
coefs = pysiglib.sig_coef(path, words, prefixes=True)
# Returns coefficients for (4,), (4,3), (1,), (1,2), and (1,2,3)
print(coefs)
.. code-block:: python
# Computing specific coefficients with time_aug and lead_lag
import torch
import pysiglib
path = torch.rand((10, 100, 5))
# With lead_lag the dimension doubles (10), and time_aug adds one (11).
# Words now index into the augmented dimension.
words = [(6,), (10, 9)]
coefs = pysiglib.sig_coef(path, words, lead_lag=True, time_aug=True, end_time=2.0)
print(coefs)
"""
check_type(time_aug, "time_aug", bool)
check_type(lead_lag, "lead_lag", bool)
check_type(end_time, "end_time", float)
check_type(prefixes, "prefixes", bool)
data = PathInputHandler(path, time_aug, lead_lag, end_time, "path")
# CUDA sig_coef doesn't support time_aug/lead_lag natively —
# transform the path first, then recurse with no augmentation flags.
if data.device != "cpu" and (time_aug or lead_lag):
from .transform_path import transform_path
transformed = transform_path(path, time_aug=time_aug, lead_lag=lead_lag, end_time=end_time)
return sig_coef(transformed, words, time_aug=False, lead_lag=False, end_time=1., prefixes=prefixes, n_jobs=n_jobs)
words = check_word_or_word_list(words, data.dimension, "word")
num_multi_indices = len(words)
degrees = [len(idx) for idx in words]
if prefixes:
result_length = 0
for idx in words:
result_length += len(idx) if idx else 1
else:
result_length = num_multi_indices
flat_indices = [i for idx in words for i in idx]
if data.device == "cpu":
words_t = torch.tensor(flat_indices, dtype=torch.uint64)
degrees_t = torch.tensor(degrees, dtype=torch.uint64)
else:
words_t = torch.tensor(flat_indices, dtype=torch.uint64, device=path.device)
degrees_t = torch.tensor(degrees, dtype=torch.uint64, device=path.device)
multi_indices_ptr = cast(words_t.data_ptr(), POINTER(c_uint64))
degrees_ptr = cast(degrees_t.data_ptr(), POINTER(c_uint64))
result = SigOutputHandler(data, result_length)
if data.device == "cpu":
if data.is_batch:
check_type(n_jobs, "n_jobs", int)
if n_jobs == 0:
raise ValueError("n_jobs cannot be 0")
res = batch_sig_coef_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes, n_jobs)
else:
res = sig_coef_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes)
else:
if data.is_batch:
res = batch_sig_coef_cuda_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes)
else:
res = sig_coef_cuda_(data, result, multi_indices_ptr, num_multi_indices, degrees_ptr, prefixes)
return res
